Telefon VOIP CISCO CP-8811-K9= 2xLAN LCD
SUPER CENA - PRODUKT UŻYWANY, STAN BDB
(normalne ślady użytkowania) !!
W ZESTAWIE : TELEFON, PODSTAWKA, SŁUCHAWKA
Urządzenie obsługuje protokoły sieciowe SIP, SPD, UDP, GARP, DNS, TFTP, HTTPS, VLAN, RTP, RTCP oraz PPDP. Jest ponadto zgodne ze standardami komunikacyjnymi IEEE 802.1Q, IEEE 802.1x, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3i, IEEE 802.3u.
Model CP-8811-K9= wyposażony został w 2 porty Ethernet LAN (RJ-45), 1 port RJ-9 oraz w wyjście słuchawkowe. Wyświetlacz telefonu typu LCD charakteryzuje się rozdzielczością 800 x 400 pikseli.
Ergonomic design ● The phone offers an easy-to-use interface and provides a traditional telephony-like user experience.
Graphical display ● The 5-in., 800 × 480 resolution, grayscale display provides scrollable access to calling features and textbased XML applications.
Handset ● The handset is a standard wideband-capable audio handset (connects through an RJ-9 port).
● The standard coiled cord has a custom end for concealed cable routing beneath the phone (cord length is
approximately 21 in. [55 cm] coiled and up to 72 in. (183 cm) extended).
● The handset is hearing aid-compatible (HAC) and meets Federal Communications Commission (FCC)
loudness requirements for the Americans with Disabilities Act (ADA). You can achieve Section 508
loudness requirements using industry-standard inline handset amplifiers such as Walker Equipment W-10
or CE-100 amplifiers. The dial pad is also ADA-compliant.
Speaker phone ● The full-duplex speakerphone gives you flexibility in placing and receiving calls with hands free. For added
security, the audible dual tone multifrequency (DTMF) tones are masked when the speakerphone mode is
used.
Analog headset ● The analog headset jack is a standard wideband-capable RJ-9 audio port.
AUX port ● You can use an auxiliary port to support electronic hookswitch control with a third-party headset connected
to it.
Ethernet switch ● An internal 2-port Cisco Ethernet switch allows for a direct connection to a 10/100/1000BASE-T Ethernet
network (IEEE 802.3i/802.3u/802.3ab) through an RJ-45 interface with single LAN connectivity for both the
phone and a co-located PC.
● The system administrator can designate separate VLANs (IEEE 802.1Q) for the PC and phone, providing
improved security and reliability of voice and data traffic.
Keys ● The phone has the following keys:
◦ Line keys
◦ Soft keys
◦ Back and release keys
◦ Four-way navigation and select keys
◦ Hold/Resume, Transfer, and Conference keys
◦ Messaging, Application, and Directory keys
◦ Standard keypad
◦ Volume-control toggle key
◦ Speakerphone, headset, and mute keys
Backlit Indicator ● The phone supports backlit indicators for the audio path keys (handset, headset, and speakerphone),
select key, line keys, and message waiting.
Replaceable bezel ● The phone includes a black bezel; an optional silver bezel is also available separately.
Dual-position foot stand ● The display is easy-to-view and the buttons and keys are easy-to-use. The two-position foot stand
supports viewing angles of 35 and 50 degrees; you can remove the foot stand for wall mounting, with
mounting holes located on the base of the phone.
Wall-mountable ● You can install the phone on a wall using an optional wall-mount kit (available separately).
Physical security ● The phone is compatible with the Kensington Security Slot (K-Slot) antitheft system.
Power Features
IEEE Power over Ethernet
(PoE)
● IEEE Power over Ethernet class 2. The phone is compatible with both IEEE 802.3af and 802.3at switch
blades and supports both Cisco Discovery Protocol and Link Layer Discovery Protocol - Power over
Ethernet (LLDP-PoE).
Cisco IP Phone Power Cube 4 ● This optional power cube is used as an AC-to-DC (48V) power supply for non-PoE deployments. Use of
the power cube 4 also requires the use of one of the corresponding AC country cords.
© 2015 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 3 of 7
Features Benefits
Call-Control Support
Cisco Unified Communications
Manager
● 8.5.1 (Non-secured mode Only)
● 8.6.2
● 9.1.2
● 10.5.2
● 11.0 and later
Cisco Unified Communications
Manager Express
(Unified CME)
● 10.0 and later through fast track
Cisco Business Edition 6000
(BE 6000)
● 8.6.2
● 9.1.2
● 10.5.2
● 11.0 and later
Cisco Hosted Collaboration
Solution (HCS)
● 8.6.2 and later (using supported UCM versions above)
Communications Manager.
Product Specifications
Table 2 lists the features and specifications of the Cisco IP Phon