✅ Socket Tester HT97D

⭐⭐⭐⭐⭐

A small and handy tester that will offer you:

Quick reading of results on a clear digital display.

Intuitive signals - you will quickly recognize anomalies.

Prevent damage to your equipment with instant information about lack of grounding or installation errors.

Reliable operation - the tester allows you to perform RCD tests, check the correct operation of residual current devices.

✅ Only here you can buy a tester with phases for the left hole of the socket in accordance with Polish standards!

If the wires are correctly connected to the socket, the N icon will still be on the left, the screen will be highlighted in green and the word "CORRECT" will be displayed.

✅ Device Components Description:

⭐⭐⭐⭐⭐

A: LCD display.

B: Power on/off and data hold.

C: RCD test.

Once inserted into the slot, the data will be automatically locked after 3 seconds. To unlock them, press the data hold button.

✅ Display element description:

⭐⭐⭐⭐⭐

1. Automatic shutdown.

2. Current value.

3. Data retention.

4. Phase voltage.

5. Leakage current.

6. Socket wiring display area.

7. Circuit breaker leakage detection (RCD).

8. Ground protection detection.

9. Leakage voltage.

10. Low battery voltage message.

11. Leakage voltage value.

12. Leakage current/voltage value.

13. Open circuit.

14. Normal.

15. Incorrect socket wire position.

✅ LITTLE SAFETY GUARD - HABOTEST HT97D Socket Tester:

⭐⭐⭐⭐⭐

This device allows you to control the safety of socket wiring in homes, offices, shopping centers, etc. It is certainly a must-have for every professional.

Quick Diagnosis: The digital display immediately tells you if the connection is correct, the ground is bad, the live wire, etc.

RCD Test: Provides additional protection against electric shock.

Compactness: The pocket size means the tester is always at hand.

✅ RCD Test:

⭐⭐⭐⭐⭐

Plug the tester into a socket and make sure the display shows the correct wiring. Press and hold the RCD button for more than 2 seconds, the residual current device (RCD) should trip and display the elapsed time. The button indicator will flash to indicate the tripping process is complete. If there is no trip, the residual current device has failed.

✅ Practical solution:

⭐⭐⭐⭐⭐

The high-resolution backlit screen ensures that the measurement results are clearly visible even in dark environments, providing a clear and easy-to-read preview of the test results.

The device is powered by two AAA batteries (included in the kit), ensuring ease of use - you don't have to remember to charge the device before testing, and the tester will notify you when the battery is low. To save battery, the device will automatically turn off after 5 minutes of inactivity.

✅ Easy to use:

⭐⭐⭐⭐⭐

After plugging the tester into a powered outlet, information about the wiring status and AC voltage will immediately appear on the backlit display.

If a wiring sequence error is detected, the orange backlight will light up to indicate the error, refer to the information on the display to determine the specific type of error.

✅ Technical Specifications:

⭐⭐⭐⭐⭐

Voltage Range: AC 30-260V/45-65Hz, ±(2.0%+2)

Leakage Voltage Range: 0～99V/45～65Hz, ±(2.0%+2)

Time Delay Test: 10-1000mS, ±(2.0%+4)

RCD Test: >30mA

Voltage Measurement (48V-250V/45-65Hz): Yes

Material: Fireproof ABS

LCD Display: Yes

Backlight: Yes

Socket Connection Detection:

1.10-1000mS, ±(2.0%+4),

2. Correct,

3. Open Ground,

4. Open Neutral,

5. Live/Neutral Reversal,

6. Live/Ground Reverse Link,

7. Open Live,

8. Live Neutral Reversal.

Power: 2 1.5V AAA batteries (included)

Dimensions: 67mm x 65mm x 75mm

Safety: EN61010-1,-2-030; EN61326-1, Category II 300V

✅ Set Contents

⭐⭐⭐⭐⭐

Habotest HT97D socket tester.

Original packaging.

2 AAA batteries

User manual