Digikeijs DR5000-ADJ - Centralka DCC (WiFi, LAN, LocoNet, XPressNet, Booster-Bus, RS, InfraRed) z regulacją napięcia

Digikeijs DR5000-ADJ - Wielosystemowa centralka DCC (WiFi, LAN, LocoNet, XPressNet, Booster-Bus, RS, InfraRed) z zasilaczem oraz regulacją napięcia wyjściowego w zakresie 15-24V

DR5000 Extended Manual V1.1.2 (2016-apr-12) ENGLISH Download

DR5000 Drivers and Config Application V1.1.1 (2016-mar-02) Download

DR5000 Drivers and Config Application V1.2.1 BETA (2016-jun-01) Download

DR5000 Drivers and Config Application V1.2.3 BETA (2016-jul-13) Download

DR5000 Multi-bus central features

Connection options:

Standard:

USB

- Communication with computer/control program;

- Protocol L.NET or XpressNet V3;

- Virtual COM-port, speed 9600, 19200, 38400, 56800 of 115200 Baud.

- Firmware updates

L.NET T

- Interface for L.NET devices (Controllers, Feedback modules etc.)

L-NET B

- Interface for L.NET devices: (manual-)Controllers, Feedback modules etc. Max 12v/1000mA power;

- Interface for L.NET devices including boosters (rail-sync). Max 12v/600mA power;

X-BUS/R-BUS

- Interface for XpressNet devices: MultiMaus, LH100 etc. Max 12v/1000mA power;

- Interface for R-BUS feedback modules.

B-BUS

- Interface for ROCO Boosters, e.g. the MultiMaus boosters 10764 lan as a booster together with the DR5000!

bereden

RS-BUS

- Interface for Lenz-RS-Bus feedback modules.

ext88N

- Interface for s88N feedback modules. Max 16 x 16 input modules (256 inputs);

- Interface for DR502xEXT modules (bi-directioneel).

Track-Output

- DCC rail-output. Max 19V/3.2Amp. Lower voltages by other power supply. Min 14V.

Program-Track

- DCC programming output. Max 19V/800mA.

Automatically switches from Track-Out to Program mode so the programming rail can also be used.

LAN

- 100baseT Ethernet. Can be connected to a local network via DHCP.

WiFi/WLAN

- bgn Wireless network via internal antenna.

- Both networks can be accessed via UDP / IP and TCP / IP;

- Protocols: Lenz XpressNet and/or L.NET-TCP/IP;

- Wifi/LAN settings can be changed via a web-interface;

- The WiFi / LAN module can serve as an AP (access point) as well as a router between the DR5000 and WiFi home network (LAN).

Control:

Stop

- Disable Rail output.

Go

- Enable Rail output

IR-Throttle

- IR receiver compatible with Uhlenbrock IRIS and Piko DigiFern (or other RC5/36Khz remotecontrols).

- 4 channels, per channel directly to be controlled/switched, 1 lok and 4 switches.

- Further control possible through X-BUS and/or L.NET (manual)controls,

the DR502xEXT modules or via the USB/LAN/Wifi interfaces.

LEDs:

STATUS

- Power: Power supply present; Programming track indicator

- Load: Ouput load. Intensity is increased with the load.

off = no load, on is is 3.15Amp;

- Short: Short circuit. Blink Code defines the bus caused the short circuit;

Continue on is Track-Out

USB

- TX: Data is sent to the computer;

- RX: Data is received from the computer.

INFRARED

- RX: Valid IR data is being received.

X-BUS

- TX: Data is being send to the X-BUS

- RX: Data is being received from the X-BUS.

STOP

- The signals to Track-Out and the booster connection are off.

GO

- The signals to Track-Out and the booster connection are ON.

L.NET

- TX: Data is sent to the L.NET;

- RX: Data is being received from L.NET

ext88

- There is at least one input on the s88 bus active;

Intensity increases with the number of active inputs.

WiFi

- Active: The Wifi Network is active.

LAN

- Link: The LAN is connected and connected to a switch / hub / router.

ROUTER

- Status: The internal router is active.

DCC:

Locs

- 126 simultaneous operation / control of locs;

- F0 - F28;

- 14/28/128 levels;

- Long and short addresses. (9999 for long, Maximum short addresses to be set from 0-127)

Switches

- 2048 switches;

- Offset +4/-4 for MultiMaus compatibility

General:

Feedback

- 2048 feedback, which is the total of all possible buses.

A smaller maximum could occur per bus

- Feedbacks from combining all buses in one series of 1-2048

Protocol conversion

- All protocols are translated to the DR.Cmd internal protocol.

Every Bus/Connection receives specific and relevant data from the internal protocol.

Power Supply

- Modern, low-loss switching external power supply.

DLACZEGO WARTO KUPOWAĆ U NAS?

Jesteśmy legalnie działającym sklepem modelarskim. Kupując nasze produkty masz pewność, że wszystkie towary zostały legalnie wprowadzone do obrotu na terenie naszego kraju, są oryginalne i obowiązuje na nie ustawowa gwarancja producenta. Do każdego zakupu wystawiamy dowód zakupu: paragon, lub na życzenie, fakturę VAT. Firma działa na rynku już od 21 lat.

Dostawa

Wszystkie zamówienia wysyłamy za pośrednictwem Poczty Polskiej, renomowanych firm kurierskich DHL/UPS/FedEx lub dostarczamy do Paczkomatów InPost. Towar z reguły wysyłamy tego samego lub następnego dnia po zaksięgowaniu wpłaty.

Odbiór osobisty

Jeśli chcesz - Twoje zamówienie możesz odebrać w naszym sklepie stacjonarnym mieszczącym się w Poznaniu przy ul. Strzeszyńskiej 33, lok. 220.